Last update by Fall Safe LTD May 7, 2007 Home

Search Query

To Contact Us Please Click Here

Fall Safe LTD Over 30 Experience in the Fall Protection Business

The basic design for the fall arrest harness in North America came primarily from two locations, one was the European light weight Sports Climbing Harness one-size-fits-most, copied and introduced approximately in 1982 and the other is of the parachute harness going back over 50 years, these designs are what's reflected in the fall protection harnesses today. Since 1982 most manufacturer's have copied the basic light weight Sports Climbing Harness mainly for the "one-size-fits-most" feature and added their own variations.

Fall Safe LTD. also continued with the light weight Sports Climbing Harness "one-size-fits-most" but with a variability, we know that the Sports Climbing Harness were not designed for the workplace.

As much as most harnesses look alike they are not, Fall Safe found out many years ago, although most harnesses look alike there is noticeable differences that make one harness fit better than another. We paid attention to these intricate discrepancies and made subtle changes to make the harness more comfortable, such as paying attention to the length of the lower bottom straps, leg buckles, upper body length and the placement of the "Dee" rings. With the right changes we can discourage rubbing, chaffing and discomfort and also insure a snug fit yet commissioning lots of freedom for movement, in other words, a harness should feel and fit like any other garment.

To contact us please click here

Basic Standard Harness with 5 points of adjustment and tongue and eye buckle leg straps. ANSI Class"A" Fall Protection	Basic Standard Harness with 5 points of adjustment and pass through leg buckles. ANSI Class "A" Fall Protection	Cross-over harnesses, more freedom of movement, comes with front connection for ladder climbing. ANSI Class "A" & "L"
Cross-over harness with work position side Dee rings, frontal attachment, and tongue and eye leg buckles. Side Dee rings are for work positioning, such as tie-off around a post, tree, mask and leaving you hands free to work ANSI Class "A", "L" & "P"	Harness Vest Now you can put on your harness on like a vest. This vest can fit most harnesses	Standard Harness with side Dee rings and tongue and eye leg buckle. Side Dee rings are for work positioning, such as tie-off around a post, tree, mask and leaving you hands free to work. ANSI Class "A" & "P"
Standard harnesses with Ladder Climbing Dee rings. Class "A" & "L"	Accessories, we can supply most harnesses in any combination. The above is a few examples. Reflective tape sewn into the harness for night or day reflection. Extra shoulder pads for softer fit.	The above is an extended Dee ring, this helps with winter clothing easy to reach around and connect. "NEW" Snap in buckles for any harness.
IGAR I HARNESS The Fall Safe IGAR I Climbing Harness. This is our high-end harness for the professionals. Easy to put on and multi able users.	IGAR I HARNESS Fall Protection Rescue Descent Control Back Support Leg Supports Tool Racking Snap in Buckles	IGAR I HARNESS High Angle rescue Work Position Ladder Climbing Shoulder Pads Plastic Lumbar Stiffener Adjustable hold up strap There is also an IGAR II which features a work seat Meet ANSI, OSHA & C.S.A. Class "A", "L", "P" and "E"

Fall Safe LTD© Copyright reserved 2005 Lasted updated May 7, 2007

Tele: (289) 296-7998 or Fax Toll Free (877) 355-9229

E-mail click here