| FALLSAFE.NET™ Lanyards, Carabiners and Snap hooks. |
Regarding Lanyards and hooks.
Up until the 1970's most lanyards were made of rope with a snap hook on each end. Then worker's safety groups started to realize that even when a worker was tie-off with a rope lanyard they were still getting injured in a fall, which was due to the sudden stop after a lanyard arrested the fall, in fact is some cases the injury was bad enough to declare the worker completely unfit for work.
A means of cushioning the sudden stop was required, that introduced the shock absorber, one was a mechanical device made in Germany and the other was a tear away nylon webbing pack made in the UK and called the Zorba.
Even though the mechanical unit is still available today the main type of shock absorber is the tear away webbing pack. Since the mid 1970’s there has become many variations of the tear away pack but most use the same principal “something tears to absorb energy”, later another form of shock absorb came on the scene in the 1980’s and that was a tubular webbing that had a stretchable type of yarn in the middle that allow it to stretch and cushion or absorb energy while stopping a fall. This tubular webbing is still use today but not preferred by myself as it has a tediously to stretch prematurely and I see when visiting work sites, employees walking around with extra long lanyards that have become stretched not due to to a fall but, due to tug and pull types of operations.
The webbing lanyard is now the most commonly used lanyard on the market today and that, is mainly due to cost and better weariblity over rope. Call us for more information
.
All Copyrights ® is the property of FALLSAFE.NET

| HOME | SRL RETRACTABLES | HARNESSES | HORIZONTAL LIFELINES | LANYARDS | CONNECTING HARDWARE | PICTURE GALLERY | RESCUE | LADDER & TOWERS |
| Lanyard - Each can be Ordered with Any Type of hook |
![]()
"Y" Type Lanyard | ![]() hook and unhook Lanyard with 4" opening gate hooks to fit onto most anchors with shock absorber - Sold in varible lengths Work Positioning Web Lanyard |
![]() No shock absorber for work positioning only. To prevent a worker from accessing a fall area or pole climbing restrain |
![]()
Re-Bar work Positioning | ![]()
Work Positioning rope Lanyard |
![]()
|
| Don't Choke Back on a Lanyard, use a Tie-off Adapter for Safety |
![]()
Tie-off with Pass Through "D" Rings | ![]()
Disposalable Tie-off with open eye | ![]()
Open Eye and Wear Pad |
![]()
|
![]()
Wire Sling or Adapter | ![]()
Beam Clamp and Sling | ![]()
Loop Sling |
![]()
|
| HOOKS & CARABINERS |
![]()
Gold 3/4" Standard Snap hook | >Snap hook with double locking - gate opening 3/4" inch Price $14.00 Load Indicator Snap hook | ![]()
Ladder Snap hook |
![]()
|
|
Captive Eye carabiner |
Ladder Steel Carabiner |
Alumimum carabiner |
![]()
|
FALLSAFE™ For all your fall protection hardware needs
Contact us for further information

anchor, Testing, hook, snaps, carabiner, rail track, body harness, rescue, climbing, lanyard, lifeline,retractable, shock absorber, rope grab, safety, roof anchor, workplace,descent control, belt
Copyright® Property of FALLSAFE.Net 2000 last updated Dec 2011